An irritating, uncomfortable, and often painful occurrence is when an engagement ring spins around the finger.
It’s one of those little-discussed facets of ring wear that becomes immediately apparent once you begin doing so. Interestingly, we don’t give much thought to this when shopping for engagement rings.
There are, however, a variety of solutions to this problem, some of which are short-term while others are more long-term. Let’s check it out.
What Makes Ring Spinning a Problem?
Spinning shouldn’t be an issue if you’re wearing a round ring, like a wedding band.
The problem with spinning occurs, however, when a precious stone is set in the middle of a ring, and the ring is worn high on the finger.
When these rings rotate, the gemstone can flip to one side, becoming annoying or even painful to the other fingers.
Avoid rings that spin if you want to wear them frequently, such as an engagement ring.
Why Does Your Ring Keep Spinning?
Before applying the proper fix, you must figure out what’s triggering the spinning ring.
In some circumstances, there is a single cause of irritation, while in others, there are multiple. Determining the root problem is essential to finding a workable remedy.
You can fix the issue by exchanging the thin band for one strong enough to secure the diamond. It will help if you are looking for a band in which the bottom is significantly more expensive than the top.
It may not be to your taste, but it beats the alternative of the ring whirling or coming off your finger.
A 2mm band, for instance, is rather popular as an engagement ring width. There are even 1.5mm ones.
Weighing in at two carats, a diamond set in one of these rings might tip the scales too far. Wider bands aren’t necessarily more convenient, but they may prevent the diamond from moving about your ring.
The daytime swelling of your fingers is normal. Because of this, the size of your finger might fluctuate by as much as half a ring size throughout the day, causing the sizing to be inconsistent.
The ring would be too loose throughout the day if it were picked out when the person was bloated. And during some seasons, the variation is quite noticeable.
Cold weather can cause your fingers to contract, making it challenging to keep your ring in place. Your fingers will swell in the summer, making the ring tighter than usual.
When trying on rings or having your finger measured, it’s best to wait until your hand has been at a consistent temperature for a while.
Setting a powerful gemstone on a narrow band creates an unattractive visual imbalance. As a result of the top’s higher weight being unsupported by the lower bands, it spins.
No matter how you set it, the gemstone will start to revolve due to the force of gravity.
Size is Too Big
You can estimate the size of a ring in several ways:
- Using a string wrapped around one’s finger and a ruler to determine a value.
- Sizing yourself with an existing ring
- Finding your ring size with a real or digital ring sizer
While these can help with approximations, they can also result in a spinning ring if you need to be more careful. If your ring is a size 6, it may fit snugly, but if it were a size 6.5, it might spin.
You may often find a comfortable fit by going up or down half a size, while bespoke sizes are available for those who need them.
Therefore, the only method to determine the proper size is to make several attempts.
The option to try on the ring you plan to wear will allow you to decide whether to go up or down a size.
The most common cause of a wedding or engagement ring spinning has large knuckles. A larger ring size is required to fit over the knuckles, but after that, your finger becomes too small to accommodate it.
It will only be snug on your finger if it can go over your knuckles. You can’t wear a ring if it doesn’t fit over your knuckle.
It is an essential factor to consider when deciding on a ring size. Find a size just right for getting over your knuckle but not so big that it slips off your finger.
However, options are designed to address this problem if you are still looking for that ideal match.
How to Keep a Wedding Ring From Spinning
You can prevent your ring from spinning in several different ways. There are two categories to classify these solutions: temporary and those that will prevent the problem from occurring again.
A ring guard is another name for the noodle. It’s a plastic tube that fits within the ring and holds it in place.
Noodles come in a variety of sizes to accommodate a variety of finger lengths. The noodle is surprisingly cheap compared to other methods used to repair rings.
You can use some tape to temporarily hold the ring in place, whether for an outing or just for the day. Extend the tape and make your cuts on the reverse side.
After the tape is cut, it is rolled very thinly to make a cylinder. The ring and finger are taped together with this tape. This tape serves its purpose for a limited time before you must replace it.
To keep the ring from spinning, these beads are placed inside it to minimize its diameter. The metal bead is secured to the ring to fill the void between the wearer’s fingers and stop the ring from spinning. Many people report that this bead is unpleasant to wear on their fingers.
Get Yourself Another Ring
You may prevent the ring from spinning by stacking other rings on top of it. Again, this is a stopgap to keep your ring from falling.
Resize Your Ring
Resizing your ring is the most reliable and costly solution to the problem of your ring spinning. While this may set you back financially, it is a long-term answer to the problem of your ring spinning.
You can resize your ring at the jewelry shop you bought it from. Within a specific time after your purchase, certain shops will offer to resize your ring for free.
The jeweler must have an exact measurement of your finger before resizing the band, or the ring may become too small, and the finger may have trouble fitting through it. The ring is disassembled by first removing the shank.
You’ll be glad you saved this information if it’s needed later. After that, the ring is joined using solder. The ring is polished to perfection to remove any trace of repair.
This approach may not work for you if you have huge knuckles. The ability to resize metals is also limited.
Gold steel, for instance, is brittle and breaks when pounded, while tungsten is too tough to be shaped by ordinary metalworking techniques.
An excellent option for anyone who wants to keep their ring from spinning is the hinge band. Pricey as it may be, it fits even the largest of knuckles.
Instead of threading the ring between your knuckles, you may open it up and slip your finger right in. People with arthritis, whose joints frequently swell, can benefit from the ring type.
This spring is set inside the ring to protect the remaining 25% of the band. The spring lengthens toward the knuckles and then relaxes to conform to the finger’s circumference.
It’s a more pleasant alternative than using the ring beads. Furthermore, the cost of having a ring sized for your finger is reduced throughout the spring.
Similarly to how hinged shank functions, so does a scaling bar. Sizing bars, typically U-shaped, are attached to the underside of the ring, similar to a hinge.
Thanks to the device’s opening clasp, you may insert a finger into the gadget without prying the knuckles. If necessary, you can reset the size selector repeatedly.
This shank design is stable on the finger because of its flat underside. After reaching the bend at the edge, it keeps the stone in place.
Even though this design frequently causes finger discomfort. You should think about the alternatives. One must either master the euro shank or the ring spin. Make a decision based on how you feel.
There is some functional resemblance to a noodle here. It is secured at the ring’s underside to eliminate any visible gap between the finger and the ring.
Add another invisible adjuster to your ring if the first one needs to make it quite the correct size.
Use Nail Polish
Having this as a last resort is a gift from me to you. For urgent ring repairs, this is your best bet.
Nail polish is all you need to resize your ring; coat the inside of the shank with a standard polish. After the polish has dried, the process can continue.
Then, you can insert your finger without worrying that it will spin. You can add extra paint to the ring’s shank if it’s too big.
Frequently Asked Question
How do I stop my stacked ring from spinning?
However, you can use a connector, such as a flexible ring adjuster, to keep the two rings together if they keep spinning or getting out of order. You can also use some string in the same shade as the metal to keep them together without spoiling the look or feel.
What does it mean when your wedding ring keeps turning?
It’s much more likely that your ring will slide around when your hands are cold, and your fingers have shrunk slightly from lack of warmth. It might even come off if it’s just a tad too big. In hot weather, however, the opposite is true: swollen fingers can prevent the ring from moving freely.
How do I get my ring to stay together?
You can purchase ring guards if the problem is maintaining the rings’ secure placement. Inserting these tiny plastic or metal guards at the base of your rings prevents them from scratching against one another and keeps them securely in place.